How do I attach the wires to my 2017 hartiage softail, where do I attach the wires on my bike
You should be able to access all necessery wires on the back side of your bike. Look to see if you can place the controller under your seat closer to the back of the bike. From there you should have access to all wires.
Let me know the results.
Will it work with 3 wheeler like a Ryker 900 rally and or a Spyder F3 Limited?
yes, not a problem. As long as you can locate the wires going to signals and brake lights.
Will it work with a moped scooter?
yes, works fine
Dose it require welding?
No welding. You will need to connect 4 wires. You will use electrical tape
Is it waterproof?
Yes, SRHL2 is waterproof
Will this work with a 96 vulcan 1500 classic
Will work just fine
What is the weight?
" " charging temperature range?
" " battery information?
" " dimensions?
" " mount adhesive?
" " charging port?
The light assembly itself is about 4 oz. Built-in rechargable battery, 1100mAh, 8"x 2" x 1".
Comes with velcro adhasive. Charges through micro-USB port. USB cable included
I uave a a1995 Harley davidson will it work with that
Yes, not a problem
Will this work if I ride a Honda Ruckus.
Yes, no problem
Where does main controller mount
main controller is mounted on the bike. depending on your bike, and where is more convinient to reach the power cords needed, you can install under your seat, inside your bags.. Since the unit is not fully waterproof (weather resistance), you may want to instal in a somewhat protected area.