ZR1 User Manual 

                              (including ZR1BT and ZR1BTWIFI)

2 Channel 1080p Recording

Full Glass "A+" Wide Angle lens

3.0" TFT Screen

Smart Park

Water Fully Resistance System

Removable Face

Available with Wi-Fi and Bluetooth

Control And Display Information

Memory card port is located on the bottom of the unit (4). Insert your card with contact points first and in front. Please make sure to use a high-speed card, type 10 or above (U3 is recommended), up to 128GB.

All functions are accessible by three side bottoms, UP,  MENU and DOWN.

Top left on frame:

  Red LED light: Power is restored

Blue LED light, on standby, ready to record

Flashing Blue light: Recording in progress

Top of the display from left to right:

Record or standby indicator. Red while recording turns green at "pause".

Video resolution and recording speed  

Recording on Files

SD card indicator

Middle of display:

Monitor indicator. This symbol will turn green once there is an external monitor, such as your smartphone is connected.

Wi-Fi indicator. This symbol will turn green when the Wi-Fi connection is established.

Bottom of the display from Left to right:

Date, Time

In Red, if recording,  indicates elapsed time. On standby, turns white, time remaining on your card.

Placing the DVR on The Cradle:

With the memory card port on the bottom of the unit, Place the DVR so the connection ports match up. Once you get the DVR closer to the cradle, the magnets inside the cradle will grab and pull the DVR. You will just need to push the DVR slightly into place.

To remove the DVR from the cradle, simply place your finger between the DVR and power cables connected to the cradle and pull lightly. The DVR will pop out.

Before installing the unit on your vehicle, it is recommended to test the unit to make sure all systems are working as desired.  Controls could also be more accessible before installation.

  To test the unit, simply connect the cameras to the DVR cradle and insert the DVR. Using the special  USB power cord, provided, power up the unit through a 2.0 Amp power bank or USB outlet.

Operations:

Sykik Rider cameras are designed to turn on and start recording once you start your ride.  The ZR1 comes standard with a Smart Park power module, motion sensor. This motion sensor and power module will power up your system when you move or start your bike. If your bike provides a very smooth ride, it might not be able to support the Smart Park. In this case, please ask your dealer or contact us for a three wire power module.  

 Control Functions:

 UP/ Down

   To choose between camera views on the monitor front, rear or booth.

Menu

  Press the menu to start or stop (PUSE) recording.

In pause mode, press and hold for 2-3 seconds to access the main menu.

Main Menu:

   Pressing the Menu button for 2-3 second in pause mode will take the system in the main menu. There are 4 options on this page:

Cameras

    Choosing this option takes you back to monitoring the live cameras.

Film Files

    To access recorded files

Choose the desired file, press menu to play. Use the UP Down to fast forward or back on any file.

Press and hold Menu to go back

Languages

  To change the language of the system. 17 languages are available in 5 pages. Use UP Down buttons to desire language. Press Menu to activate the desired language.

Settings:

             1- Movie Mode

 Choose between 3 different Video resolution and speed for your recording.  

Cruise Mode(1080p with 30 fps) excellent for cursing and capturing footage in very high resolution.

 Sports Mode (720p at 60fps) is recommended for faster actions,  sport and racing bikes.

Standard Mode (720p at 30fps) is recommended for everyday dash cam use, for longer recording time at full HD resolution.

            2- Movie Clip Time

  You can choose the length of your video files from 1 to 5 minutes. Please note, once the power to the unit is stopped, the last running file might not be completed. So it will not be saved. Reducing the file length reduces the possible loss of the previous record. Shorter data, are also easier to locate if exact footage if necessary.

            3- Sound Record, Turn on, or of the built-in Mic. located on the main DVR.

           4- Bluetooth Pairing (ZR1BT and ZR1BT WiFi)

To connect to your headset, turn on the Bluetooth pairing to be recognized by your headset)

             5- Beep, Turn on or off the beeping sound for notification, once any change made.

             6- Clock setting

To set the date and time for your recording.

Use UP Down to choose the desired year, press menu to activate and go to the next.

             7- Date format

Choose between 4 different formats of the month, day and year.

             8- Flicker

To set the Hz according to your local power setting. For the US and North America 60Hz, and most other countries 50Hz.

             9- LCD Power Save

Screensaver time. By choosing "OFF", your monitor will stay on at all times when power is supplied.

            10- Protect Level

Adjusts the sensitivity of the G sensor.

            11- GPS setting

            12- Time Zone

            13- Reset Setup

offers to delete all changed setting and go back to factory set default.  

            14- WiFi Mode

To turn On or Off the Wi-Fi

            15- Format SD-Card

To erase all files on your memory card and re-format.

            16- SD Card Information

Provides information of available recording time on the inserted memory card, based on different resolution settings.

              17- FW Version

Provides information on your installed software.

Wi-Fi operations

(ZR1WiFi and ZR1BT WiFi)

Download APP, " WiFi Camera Viewer" on Google or Apple  APP stores. Or scan:

To activate the Wi-Fi, Please make sure the Wi-Fi is a symbol on the lower right side of your display indicated ON position. If you have a strike line through the symbol, please go to the menu and turn on the Wi-Fi (14).

1- Open your device (Smartphone) and search available Wi-Fi. Find "MOTODV_M2" and connect.

Password:  1234567890

2- Open "WiFi Camera Viewer" APP, when connected

 Camera Preview

to monitor the cameras live.

Camera Control

You can change the Wi-Fi name and password,  camera settings, date and time, resolution and more.

Camera File Browser

This option allows you to watch the previously recorded footage.  Toggle between Camera-Front and Camera-Rear to view the different videos. Then check off the desired videos. Once chosen you can save and delete specific footage. For playback, you must select one file at a time.

Local Album

This option shows you the saved video. And allows you to open or delete them.

Technical specifications

Sykik Limited Warranty

  Congratulations, you have made an excellent choice for this quality product. Our commitment to quality also includes our customer service and product service. Please Click here to contact us with any questions or comments. Should you contrary to expectations, experience defects due to manufacturing faults, SYKIK will provide you with a warranty against defects as follows:

 Warranty

The product is guaranteed to be free from defects in quality and parts for 360 days from the date of your purchase. Errors that occur within this warranty period, under regular use and care, will be repaired, replaced by a new or refurbished equivalent value at our discretion.

Proof of purchase

This warranty is valid for the original purchase and is not transferable. Please keep your purchase invoice or receipt as the best proof of purchase and proof of date on which the purchase was made.

Extent of Warranty

This warranty is limited to defects in workmanship or parts. All defective products or parts will be repaired, replaced by a new or refurbished equivalent value at our discretion.

This warranty does not cover

1-       Batteries, rechargeable batteries or any other consumable parts or items.

2-      Normal wear and tear to the product or component.

3-      Any defects caused by an accident, misuse, improper installation or operation, lack of reasonable care, unauthorized modification, loss of parts, tampering or attempted repair by a person not authorized by the manufacturer.

4-      Any product that has been used for purposes other than domestic consumer use.

5-      Any damage caused by improper power input or an improper cable connection

To make a claim

Just send the defective unit, or part, along with a copy of your invoice and description of the problem to:

                                    SYKIK Warranty Works

                                     4722 Worth Street

                                     Los Angeles, CA 90063

 When making a return, please make sure the product is appropriately packaged to ensure will not be damaged during transit.

 Shipping Charges If your product is purchased within 180 days, Sykik Warranty center will ship the unit back to you at no charge. For warranty periods of over 180 days, SYKIK Warranty center will not accept any shipping charges.

To download this User Manual Click Here

To view our Installation Guide Video Click Here

To view product page Click Here

 If you wish to Contact Us Click Here